What Does the LG Washer FE Error Code Mean?
If your washer shows other issues like the OE, UE, or LE error codes, those point to different problems and fixes.
The LG washer FE error code usually indicates an overfill issue, meaning the washer is detecting too much water in the drum. This can happen if the washer keeps filling when it should stop, or if the water level sensing system is not reading correctly.
Common Causes of the FE Error Code
- Faulty water inlet valve (stuck open or leaking)
- Defective pressure switch (water level sensor)
- Loose, clogged, or damaged pressure switch hose
- Control board sending the wrong signal
- Excessive or continuous water supply
How to Fix the LG Washer FE Error Code
- Unplug the washer for safety.
- Turn off the water supply valves behind the washer.
- Wait 5 minutes and then plug the washer back in to reset it.
- Check if the washer is still filling when it should be stopped.
- Inspect the inlet valves for leaks or a stuck open condition.
- Check the pressure switch hose for clogs, kinks, or disconnection.
- Run a short cycle to test whether the error returns.
When to Call a Professional Technician
If the FE error continues after basic checks, it may involve the inlet valves, pressure switch, or control board. Because an overfill problem can cause flooding or electrical risks, professional service is recommended when the issue persists.
Frequently Asked Questions
Can I keep using the washer with an FE error?
No. Continued use may cause overflow, leaks, or damage to internal components.
Is the FE error dangerous?
It can be. Overfilling may lead to flooding or electrical hazards if water reaches sensitive components.